home >> fire alarm systems >> engineered systems >> initiating devices

INITIATING DEVICES

:: click the arrow or the product image to download the pdf files ::

Annunciators

 
  The LCD-80 is an 80-character, backlit LCD display annunciator for the NOTIFIER AM2020, AFP1010, AFP-400, AFP-300, AFP-200, System 5000, and System 500 fire alarm control panels. Up to 32 LCD-80s may be connected onto the twowire EIA-485 port. The LCD-80 has two basic modes of operation, "Terminal". and "ACS" mode.
click here for the pdf file
click here for the pdf file
3198...click here for the pdf file
6820...click here for the pdf file
-------------------------------------------

Audio - Visual Devices

 
  Wheelock's new devices, the NS/NS4 Series Horn Strobe and the NH Series Horns, feature low current design, with reduced inrush.
click here for the pdf file
more...click here for the pdf file
-------------------------------------------

Duct Detectors

 
  An HVAC system supplies conditioned air to virtually every area of a building. Smoke introduced into this air duct system is thus distributed to the entire building.
click here for the pdf file
more...click here for the pdf file
-------------------------------------------

Heat Detectors

 
  The FST-751 Series intelligent thermal detector is used with the intelligent Notifier Fire Alarm Systems to measure thermal levels caused by a fire and report the analog level of the thermal measurement to the control panel.
click here for the pdf file
more...click here for the pdf file
-------------------------------------------

Pull Stations

 
  The NOTIFIER NBG-12LX is a state-of-the-art, dual-action (i.e., requires two motions to activate the station) pull station that includes an addressable interface for any NOTIFIER intelligent control panel. Because the NBG-12LX is addressable, the control panel can display the exact location of the activated manual station. This leads fire personnel quickly to the location of the alarm.
click here for the pdf file
more...click here for the pdf file
-------------------------------------------

Smoke Beam Detectors

 
  The System Sensor Model 6424 Beam Detector is ideal to meet the unique fire protection challenge of atriums and other open areas with high ceilings. The System Sensor Model 6424 Beam Detector is designed for four-wire 24 VDC applications.
click here for the pdf file
more...click here for the pdf file
-------------------------------------------

Smoke Detectors

 
  The NOTIFIER FSP-751 (photo) and FSI-751 (ion) are analog, addressable, low-profile (height measures only 1.66"/42.14 mm) smoke detectors designed for the entire line of intelligent systems from NOTIFIER. The FSP-751T photo model includes a built-in thermal (heat) detection device. If either condition (smoke or heat) is detected, the device will alarm.
click here for the pdf file
more...click here for the pdf file
-------------------------------------------

Visual Detectors

 
  NO INFO
?
more...

 site design by
     LiquidWebSolutions.com
Copyright © 2002 Laredo Alarm. All Rights Reserved.